PowerPanel+

A high performing product for external, internal and fire tunnel walls in commercial and industrial construction.

Hebel PowerPanel+ panels are available in a range of sizes

Tongue & Groove profile

Caged steel mesh, coated with an anti-corrosion protection layer for maximum strength and durability

Used for a range of applications, including low-rise industrial, commercial developments and high-rise offices, the PowerPanel+ system consists of Hebel panels installed vertically or horizontally to steel or concrete structural framing as a non-loadbearing cladding. This provides a cost-effective solution, with lightweight panels allowing reduced structural components and smaller lifting equipment compared to concrete.

Strong and solid, PowerPanel+ contains steel-reinforcement coated with a layer of anti-corrosion protection for maximum strength and durability. With excellent fire rating properties, thermal resistance performance, and less wastage resulting from the fact PowerPanel+ can be made to length, this system is the ideal choice for your next commercial or industrial project.

Benefits

Strong and secure

Fast construction times

Risk minimisation

Easy fire-rating compliance

Easy acoustic compliance

Superior insulation qualities

Maximised floorspace

Design efficiency

High sustainability values

Product versatility

Applications

Product Sizes

PowerPanel+ for Commercial Walls

PowerPanel+ 100 – Commercial Wall Panels – Non Cuttable – (100mm Panel is offset T&G only) (Minimum stocks held. Leadtimes may apply)

  • 2700x450x100 T&G2M5
  • 3000x450x100 T&G2M5
  • 4500x600x100 T&G2M5

PowerPanel+ 125 – Commercial Wall Panels – Non Cuttable – (Minimum stocks held. Leadtimes may apply)

  • 4500x600x125 T&G2M10
  • 5990x600x125 T&G2M10

PowerPanel+ 150 – Commercial Wall Panels – Non Cuttable – (Minimum stocks held. Leadtimes may apply)

  • 4500x600x150 T&G2M10
  • 5990x600x150 T&G2M10

PowerPanel+ Made to Order (MTO) – Commercial Wall Panels (100mm to 125mm thick) – Non Cuttable – (100mm Panel is offset T&G only)

  • Up to 4000x600x100 T&G – 5mm Bevel
  • Up to 6000x600x125 T&G – 10mm Bevel

PowerPanel+ Made to Order (MTO) – Commercial Wall Panels – Non Cuttable (150mm to 300mm thick) are to be designed and reinforced to achieve greater windloads and panels spans

  • Up to 6000x600x150 T&G – 10mm Bevel
  • Up to 6000x600x175 T&G – 10mm Bevel
  • Up to 6000x600x200 T&G – 10mm Bevel
  • Up to 6000x600x250 T&G – 10mm Bevel
  • Up to 6000x600x300 T&G – 10mm Bevel

T&G = Tongue & Groove; 2M = Caged; 5 = 5mm Bevel; 10 = 10mm Bevel; Note: MTO Widths can vary 300mm to 600mm
Note: Panels are non -cuttable i.e made to length
Note: All Made to Order products are: Made to Confirmed Order Only – Minimum quantities and lead times apply – Engineering checks apply.

Product Accessories

Adhesives and Coatings
21933 - Hebel Adhesive
21935 - Hebel Mortar
Width Code Description Main Application Selling Unit
21933 Hebel Adhesive All systems 20kg Bag
21935 Hebel Mortar All systems 20kg Bag
Tension Ties
21875 - Tension Tie Stainless Steel 200mm panel
21874 - Tension Tie Stainless Steel 150mm panel
21873 - Tension Tie Stainless Steel 125mm panel
Width Code Description Main Application Selling Unit
21875 Tension Tie Stainless Steel 200mm panel Install 200 panel to frame Each
21874 Tension Tie Stainless Steel 150mm panel Install 150 panel to frame Each
21873 Tension Tie Stainless Steel 125mm panel Install 125 panel to frame Each
Nails
21929 - V-Nails
Width Code Description Main Application Selling Unit
21929 V-Nails Nail tension tie to panel Each
Lifter
5131442 - Hebel Panel Lifting Lug
21960 - Panel Scisser Lifter H/zontal 125-200mm
Width Code Description Main Application Selling Unit
5131442 Hebel Panel Lifting Lug For custom panels 125 - 300 mm Each
21960 Panel Scisser Lifter H/zontal 125-200mm Commercial walls Each
Hand Tools
119426 - Panel Separator Kit
Width Code Description Main Application Selling Unit
119426 Panel Separator Kit All systems Each
Cuts
Cut 2 - Long cut to create a custom panel width
Cut 1 - Cross cut standard panels to length
Width Code Description Main Application Selling Unit
Cut 2 Long cut to create a custom panel width Cut charge - no discount Each
Cut 1 Cross cut standard panels to length Cut charge - no discount Each
Bracket
21936 - Right Angle Bracket 200mm 3 slots
Width Code Description Main Application Selling Unit
21936 Right Angle Bracket 200mm 3 slots Connect 125mm or 150mm panels to slab at top & bottom, fixed to rasped tongue side of panel Each

Downloads


To learn more about our products and systems, search the categories below to view our range of Hebel guides, manuals, brochures and files.

View all Downloads
  • Design & Installation
  • Brochures
  • Technical Manuals
  • SDS Files
Design & Installation

Commercial and Industrial Wall Systems - Design Guide

DOWNLOAD
Brochures

Commercial and Industrial Product and Range Guide

DOWNLOAD

Subscribe to Hebel Matters.

To stay up to date with the latest Hebel news, articles and feature projects, enter your email to sign up to our monthly e-newsletter.

Subscribe
You are now subscribed!
Your email address is not valid
CSR

Privacy Policy | © 2016 Copyright Hebel. | Website by Moso

Top